Last updated on February 27th, 2021
The world is a tumultuous place these days, no matter where you are. We’ve been beset by the disease known as COVID-19 or ‘coronavirus’ wildfires, a particularly nasty species of hornet emerging from East Asia, and more. We’ve seen over and over again how we can only control so much of our lives, and the unfathomable ways that the world around us can suddenly become less hospitable than we thought.
Many people have had to learn how to handle these situations quickly, and in some countries, six and seven-digit numbers of them didn’t learn quickly enough. With the seemingly endless stream of crises that society faces, many are learning anew about how to properly prepare for an emergency. All those drills in school might have seemed pointless, but we’re needing them more and more.
As bad as the world around us is, there’s one menace that many thought might take a leave of absence until the public health crisis of COVID-19 was over. These people are learning how wrong they were, as violent riots and protests gain steam in many third-world countries.
Although there was a widespread tacit assumption that the world’s populations would join together in an attempt to see the last of the coronavirus, there are many places where looting, contraband trafficking, and other criminal activity have taken advantage of closed businesses and empty streets to further their nefarious aims. This issue is exacerbated by a dearth of law enforcement and other essential services that have been pared down to a skeleton crew in an attempt to minimize exposure and slow down the spread of the coronavirus.
Those same closed businesses have given rise to another difficulty. The millions that find themselves out of work take to the streets to express their feelings. Large-scale public protests and demands for more affirmative and effective government action have swept several countries, escalating at times into civil unrest and even violence and vandalism in some places.
There have been many attempts at public appeasement, from all levels of government, but few of them have met with much success. While what enforcement remains does the best it can to keep order among the public, many individuals have quietly begun to procure the means to defend themselves should the authorities arrive too late to do so.
In some places, regulations prohibit weapons from being stockpiled. There are citizens who occupy themselves in fortifying their houses against intrusion or arson and take to makeshift means for their personal protection. While others, as a law-abiding citizen, can legally procure and be equipped with a firearm, and noticeable portions of the populace have moved to do exactly that.
We often think of a firearm for personal defense to be limited to a handgun, but the world is showing a steadily increasing interest in long arms, preferring their added weight and accuracy as well as the larger and more powerful magazines that they can support. There is enormous variation in the market, as a relatively small slice of the population has ever really felt this need before.
Numerous first-time firearm owners have come up against their own inexperience as a serious obstacle. It takes a certain amount of time and training to properly aim and fire even a long gun, let alone the more challenging handgun. Here, at least, is something that the world has struggled with for decades – some people are just not a good shot.
The most common solution to this is the dorsal scope, which is an added optical device mounted on top of the gun either on a set of screws and clamps or the universal Picatinny attachment rail. These scopes can magnify the target many times and allow even an inexperienced shooter to score hit after hit.
Achieving this goal involves a process called ‘zeroing’ the rifle, where the scope is adjusted until it centers on where the projectile will hit. Keeping the zero is crucial to the proper operation of a rifle with a scope, but keeping the scope and the rifle together is a bad idea; it exposes the scope to dirt and damage and makes the rifle harder to store.
While you could get a specially made case for your gun, a simpler and less expensive way around this challenge is the QD, or quick-detach, scope mount. These mounts function by leaving the Picatinny attachment plate on the gun, instead of having it permanently attached to the scope. When you are ready to use the gun again, putting the scope back on the Picatinny plate will return it to the exact zeroed position it was when you removed the scope, without needing to be moved forward or back to regain precision.
Firearms, and anything to do with them, are a confusing and often intimidating marketplace to get into, but many people are feeling that they have no other choice. Getting a good QD scope mount helps these people along by making sure that they will only ever need to zero their gun once.
The world of firearm accessories, QD mounts included, is fast-paced and demanding. A new consumer can easily get lost in a storm of conflicting information from vendors that have multiple conflicting opinions on a topic. Picking the best quick detach mount out of all the ones there are might seem hopeless, but never fear; we’ve put together the ten best mounts to help you choose what you want by your side.
Read Related Article: Top 11 Best Long Range Rifle Scope for the Money
|1. Burris Optics 410341 410342 410343 410344 P.E.P.R || ||Check Price|
|2. UTG Integral Med-pro || ||Check Price|
|3. WEAVER Grand Slam Lever Lok || ||Check Price|
|4. Riton RT-M || ||Check Price|
|5. HWZ Hunting Scope Mounts || ||Check Price|
|6. FIRECLUB 2020 New Arrival || ||Check Price|
|7. Green Blob Outdoors || ||Check Price|
|8. Alonefire KC12 || ||Check Price|
|9. TAC Vector || ||Check Price|
|10. Warne Maxima || ||Check Price|
Our Best QD Scope Mount Reviews and Comparisons
1. Burris Optics 410341 410342 410343 410344 P.E.P.R
While most scopes simply sit atop the Picatinny rail, this mount features another set of rails atop itself, allowing for further vertical customization of your gun.
- 30-34mm sizes available
- Up to 2” forward positioning
- Top-mounted Picatinny adapter on both rings
- PEPR (Proper Eye Position Ready) mounting style
What We Like About Burris Optics 410341 410342 410343 410344 P.E.P.R
This mount lets you have an external scope while still being able to use a Picatinny adapter, a strong argument for any firearms enthusiast.
What We Don’t Like About Burris Optics 410341 410342 410343 410344 P.E.P.R
The rings are fixed firmly in place, making this device hard to adjust to some brands of scope.
- Eye positioning assist
- Spacious forward mounting
- Added Picatinny rail
- Thumb levers detach quickly and easily
- Rings do not obstruct the field of view
- Rings are difficult to expand and contract
- Rings cannot be moved apart for different scope measurements
2. UTG Integral Med-pro
Although this product is named as a UTG, or Under The Gun, it works well on the dorsal Picatinny rail too, keeping your scope true no matter which side of the gun it’s on.
- Double thumb-lever release
- 1” ring diameter
- 95mm base capacity
- Weighs 5 ½ ounces
What We Like About UTG Integral Med-pro
The release levers on this scope mount use both a thumb-lever tension spring and a screw mechanism that ensures it will hold position even after prolonged periods of firing.
What We Don’t Like About UTG Integral Med-pro
A double release mechanism takes considerably longer to operate either when mounting or detaching the scope.
- Stays true through extensive firing
- Top-mounted Picatinny adapters
- Large thumb levers are easy to operate
- Adjustable mount width
- Steel insert strengthens locking plate
- Rings are solidly mounted in place
- Does not have integrated eye positioning aid
3. WEAVER Grand Slam Lever Lok
This product is a simple solution to quick release, with two small adjustable rings that are free to position anywhere on the scope.
- Detached rings
- A lever-driven screw locking mechanism
- 1” ring diameter
- Aircraft-grade aluminum construction
What We Like About WEAVER Grand Slam Lever Lok
Unlike many quick detach mounts, this one consists of two separate rings that make it easier to fit all scopes instead of those specifically made to go with the mount.
What We Don’t Like About WEAVER Grand Slam Lever Lok
Setting the mounting plate for two rings means needing to properly zero both of them separately, and running the same risks of error each time.
- Weighs less than an ounce
- Individual rings allow for greater versatility
- Low profile clears the field of view around the scope
- The lever-driven screw can be easily adjusted and loosened
- Relatively cheap
- No top-mounted Picatinny adapters
- Rings are smaller and easier to lose than a full scope mount
4. Riton RT-M
This scope mount is not beating about the bush. Although made with thick rings and solid metal construction, it is well up to the task.
- Fits tubes up to 1”
- Weighs 7 ½ ounces
- 21mm rail width
- 63mm between scope rings
What We Like About Riton RT-M
With a long history of exceptional production, Riton’s solid aluminum scope rings hold tightly to any optic inside.
What We Don’t Like About Riton RT-M
A fair amount of torque is needed on the mounting screw to keep them from ‘walking’, or gradually working themselves loose, as you fire.
- Sturdy construction for the wear and tear of heavy use
- Easy lever-driven screw mountings
- Quality manufacturer
- Compatible with Weaver rail as well as Picatinny
- Lifetime manufacturer warranty
- Does not have a dorsal mounting rail
- Heavier than other options
5. HWZ Hunting Scope Mounts
This scope mount features vertically split rings to accommodate the more unusual scope builds and an elongated eye placement assist to keep you on target.
- 30mm ring width
- Large tension lock on the baseplate
- 63mm between rings
- 20mm mounting plate width
What We Like About HWZ Hunting Scope Mounts
Added length on this scope mount assists users in finding their proper eye placement and allows for larger, heavier scopes.
What We Don’t Like About HWZ Hunting Scope Mounts
Cantilever scope mounts can occasionally begin to ‘droop’, particularly if used with a larger or heavier scope.
- Tension lock is large enough to be grabbed and used easily
- Anodized metal resists chipping or adhesion
- Supports larger scopes
- Added eye placement assist
- Rings split vertically for unusual scope shapes
- The cantilever is susceptible to drooping
- The unfamiliar design may be uncomfortable for seasoned users
6. FIRECLUB 2020 New Arrival
We tend to think of a scope as sitting atop the rifle, but this scope mount proves that you can be just as accurate when shooting from the side.
- Side scope configuration
- 25mm expandable ring
- 13cm between rings
- 6” offset from the mounting rail
What We Like About FIRECLUB 2020 New Arrival
Side scopes are a tricky business and are rarely accommodated in travel cases, making it far more important than usual to be able to safely and easily detach and replace the scope.
What We Don’t Like About FIRECLUB 2020 New Arrival
This scope mount is awkwardly shaped and will not fit well into most pockets or bags.
- Suitable for unusual side-mounted scopes
- Low profile
- Hardened iron construction
- Compatible on Russian or Chinese scope models
- Single lever makes it easier to remove and replace
- Awkward to carry
- Less secure than double-lever models
7. Green Blob Outdoors
This scope mount puts versatility in its sights, with an adjustable rail that can take it from a standard dual-ring model to a full cantilever in a few moments.
- Two tension locking levers
- 25mm expandable ring
- 63mm between rings
- The rail extends 48mm beyond the mounting plate.
What We Like About Green Blob Outdoors
With this scope, you can choose how far out you want the rings and adjust quickly for better scope support and eye placement assistance.
What We Don’t Like About Green Blob Outdoors
Having a sliding rail can confuse many users who are accustomed to not adjusting the scope beyond the Picatinny or Weaver rail.
- Levers are easy to see and use
- Steel and an aluminum alloy construction
- Highly adjustable eye placement assist
- Cantilever options support larger scopes
- Vertical ring splits for greater versatility
- Additional components add vulnerabilities
- Cantilever construction can be pushed off-center more easily than solid models
8. Alonefire KC12
Among the smallest quick detaching scope mounts is this single ring, which has the toughness of much bigger models while keeping the convenience more suited to its size.
- 1” ring diameter
- 21mm mounting rail
- Anodized aluminum alloy construction
- 54mm tall
What We Like About Alonefire KC12
This model includes a set of versatile Allen wrenches for the exact placement of the mounting plate and a large, textured thumb lever to control the ring.
What We Don’t Like About Alonefire KC12
The ring stands relatively high off the mounting plate, making it more prone to inaccuracies and blocking the user’s field of view more than other options.
- Convenient small size
- Military standard steel alloy
- Hex keys included
- Molded thumb lever for user comfort
- Lighter than larger two-ring models
- Higher stature is more prone to inaccuracy
- Does not have the redundant security of dual-ring mounts
9. TAC Vector
This model features cast-metal curves and a cantilever base to take the many rigors of continual live fire.
- Double tension lock lever system
- Aluminum alloy construction
- 30mm ring width
- Single Picatinny adapter
What We Like About TAC Vector
Vector Optics uses military-style materials and construction to ensure that this scope mount is ready to take anything the field throws at it without walking or drooping.
What We Don’t Like About TAC Vector
The bolts on the mounting plate strip easily and do not provide enough purchase for a hex wrench if rounded out.
- Dorsal Picatinny rail
- Resilient aluminum construction
- Shock resistant to handle live fire
- Mounting levers are easy to operate
- Hex keys included
- Only one Picatinny adapter
- Included screws are not up to the same standard as the body of the device
10. Warne Maxima
This simplistic model is a great choice for anyone looking for a quick detach scope mount on a budget.
- 30mm tube diameter
- Lever-driven screw lock
- Sideways closure
- Weighs 5 ½ ounces
What We Like About Warne Maxima
As a relatively cheap and simple model, this ring is good for those shopping on a budget or with a beginner’s firearm.
What We Don’t Like About Warne Maxima
This scope mount does not have additional Picatinny adapters or the thickness usually expected for live-fire weapons.
- Relatively cheap
- Easy to place
- A single ring is more convenient than a full scope mount
- Sideways closure adapts to more scope shapes
- Integrated recoil control key prevents walking
- Not as sturdy as other models
- No dorsal Picatinny rail
These scope mounts are great companions to new and experienced users alike, letting you remove a scope and replace it without losing the carefully zeroed sight placement. Find one that will fit your needs and the optics you want to get your firearm ready for action.
Read Another Related Article: Top 10 Best AR 15 Scope Reviews and Optics Guide 2021